Smart adhesives

Smart adhesives

Mostrando 1–9 de 18 resultados

  • Fireseal S 310ML White (Cartridge)

     20.04

    Product Simson FireSeal S(ilicone) is a fire-retardant, neutral curing silicone sealant. Applications Suitable for both inside and outside applications in building construction, ship/yacht building and industry. For sealing (connection) joints, around window frames, outlets through walls and floors of pipes, cables, ventilation ducts etc. and as glazing sealant. Features v Solvent free and free of halogenated additives. v Permanently elastic. v Good UV- and weather resistant. v Tested on fire resistance by a.o. TNO and Warrington. v Complies to DIN 4102 class B1. v Tested according to IMO-resolution A.687 (17). Method of use Substrates: Substrates must be solid, clean, dry and dust- and grease/oil free. On porous substrates such as concrete, cellular concrete, gypsum and fibre cement Simson Primer MSP is recommended. On bare metals such as anodised aluminium, stainless steel, galvanised steel, copper, lead and zinc the use of Simson Prep M is recommended. Joint construction: Requirements to the joint construction should be at least the same - as far as fire resistance is concerned - as requirements to the total (wall)construction. The fire resistance of the joint construction can be increased considerably by sealing the joint both sides. To increase the fire resistance it is better to use non flammable materials such as mineral wool or ceramic cord or blanket instead of regular backing foam. The joint depth of expansion joints should be roughly 2/3rd of the joint width. Both depth and width should be at least 6 mm. Application: Extrude FireSeal S to the backing material with a hand- or air pressure gun. Tooling: Because of skin forming press the sealant to the sides of the joint within 10 minutes with a spatula or pointing trowel and smoothen immediately. A light soap solution prevents sticking of the sealant to the tool. Avoid penetration of soap solution between sealant and joint wall, because this can create loss of adhesion. Cleaning: Cured sealant is not soluble and can be removed mechanically only (e.g. with a razor blade or by sanding). Combustibility Low flammable as per DIN 4102 Class B1 in applications in (max. 40 mm wide) joints between solid mineral building materials.

  • MSR Bedding Compound 290ML Black (Cartridge)

     13.32

    Product Description: MSR Bedding Compound is a one component; permanently elastic, fast curing adhesive/sealant based on Silyl Modified Polymer (SMP).  MSR Bedding Compound has been approved for use in wall, ceiling and floor applications. Features: *- Solvent and isocyante free *- Very good UV resistance and ageing properties; long time resistance against fresh and salt water *- Neutral, odourless and fast curing *- Has sound and vibration deadening properties Typical Applications: As a bedding compound between; *- Steel and aluminium *- Polyester and/or wooden decks and teak strokes *- Also suitable for bonding/sealing watertight plywood sub-deck on steel, aluminium, polyester or wooden sub-deck Adhesion: In general, MSR Bedding Compound adheres well without primer on clean, dry, dust and grease free substrates; *- Aluminium *- Lacquered wood *- Polyester (GRP) In extreme environmental circumstances, like high thermal or mechanical loads with high humidity levels, the use of Simson Primer P on wooden substrates and Simson Primer M on closed metal surfaces is recommended

  • MSR Bedding Compound 290ML Grey (Cartridge)

     13.32

    Product Description: MSR Bedding Compound is a one component; permanently elastic, fast curing adhesive/sealant based on Silyl Modified Polymer (SMP).  MSR Bedding Compound has been approved for use in wall, ceiling and floor applications. Features: *- Solvent and isocyante free *- Very good UV resistance and ageing properties; long time resistance against fresh and salt water *- Neutral, odourless and fast curing *- Has sound and vibration deadening properties Typical Applications: As a bedding compound between; *- Steel and aluminium *- Polyester and/or wooden decks and teak strokes *- Also suitable for bonding/sealing watertight plywood sub-deck on steel, aluminium, polyester or wooden sub-deck Adhesion: In general, MSR Bedding Compound adheres well without primer on clean, dry, dust and grease free substrates; *- Aluminium *- Lacquered wood *- Polyester (GRP) In extreme environmental circumstances, like high thermal or mechanical loads with high humidity levels, the use of Simson Primer P on wooden substrates and Simson Primer M on closed metal surfaces is recommended

  • MSR Bedding Compound 290ML White (Cartridge)

     13.32

    Product Description: MSR Bedding Compound is a one component; permanently elastic, fast curing adhesive/sealant based on Silyl Modified Polymer (SMP).  MSR Bedding Compound has been approved for use in wall, ceiling and floor applications. Features: *- Solvent and isocyante free *- Very good UV resistance and ageing properties; long time resistance against fresh and salt water *- Neutral, odourless and fast curing *- Has sound and vibration deadening properties Typical Applications: As a bedding compound between; *- Steel and aluminium *- Polyester and/or wooden decks and teak strokes *- Also suitable for bonding/sealing watertight plywood sub-deck on steel, aluminium, polyester or wooden sub-deck Adhesion: In general, MSR Bedding Compound adheres well without primer on clean, dry, dust and grease free substrates; *- Aluminium *- Lacquered wood *- Polyester (GRP) In extreme environmental circumstances, like high thermal or mechanical loads with high humidity levels, the use of Simson Primer P on wooden substrates and Simson Primer M on closed metal surfaces is recommended

  • MSR Bedding Compound 600ML Black (Saussage)

     20.67

    Product Description: MSR Bedding Compound is a one component; permanently elastic, fast curing adhesive/sealant based on Silyl Modified Polymer (SMP).  MSR Bedding Compound has been approved for use in wall, ceiling and floor applications. Features: *- Solvent and isocyante free *- Very good UV resistance and ageing properties; long time resistance against fresh and salt water *- Neutral, odourless and fast curing *- Has sound and vibration deadening properties Typical Applications: As a bedding compound between; *- Steel and aluminium *- Polyester and/or wooden decks and teak strokes *- Also suitable for bonding/sealing watertight plywood sub-deck on steel, aluminium, polyester or wooden sub-deck Adhesion: In general, MSR Bedding Compound adheres well without primer on clean, dry, dust and grease free substrates; *- Aluminium *- Lacquered wood *- Polyester (GRP) In extreme environmental circumstances, like high thermal or mechanical loads with high humidity levels, the use of Simson Primer P on wooden substrates and Simson Primer M on closed metal surfaces is recommended

  • MSR Bedding Compound 600ML Grey (Saussage)

     20.67

    Product Description: MSR Bedding Compound is a one component; permanently elastic, fast curing adhesive/sealant based on Silyl Modified Polymer (SMP).  MSR Bedding Compound has been approved for use in wall, ceiling and floor applications. Features: *- Solvent and isocyante free *- Very good UV resistance and ageing properties; long time resistance against fresh and salt water *- Neutral, odourless and fast curing *- Has sound and vibration deadening properties Typical Applications: As a bedding compound between; *- Steel and aluminium *- Polyester and/or wooden decks and teak strokes *- Also suitable for bonding/sealing watertight plywood sub-deck on steel, aluminium, polyester or wooden sub-deck Adhesion: In general, MSR Bedding Compound adheres well without primer on clean, dry, dust and grease free substrates; *- Aluminium *- Lacquered wood *- Polyester (GRP) In extreme environmental circumstances, like high thermal or mechanical loads with high humidity levels, the use of Simson Primer P on wooden substrates and Simson Primer M on closed metal surfaces is recommended

  • MSR Bedding Compound 600ML White (Saussage)

     20.67

    Product Description: MSR Bedding Compound is a one component; permanently elastic, fast curing adhesive/sealant based on Silyl Modified Polymer (SMP).  MSR Bedding Compound has been approved for use in wall, ceiling and floor applications. Features: *- Solvent and isocyante free *- Very good UV resistance and ageing properties; long time resistance against fresh and salt water *- Neutral, odourless and fast curing *- Has sound and vibration deadening properties Typical Applications: As a bedding compound between; *- Steel and aluminium *- Polyester and/or wooden decks and teak strokes *- Also suitable for bonding/sealing watertight plywood sub-deck on steel, aluminium, polyester or wooden sub-deck Adhesion: In general, MSR Bedding Compound adheres well without primer on clean, dry, dust and grease free substrates; *- Aluminium *- Lacquered wood *- Polyester (GRP) In extreme environmental circumstances, like high thermal or mechanical loads with high humidity levels, the use of Simson Primer P on wooden substrates and Simson Primer M on closed metal surfaces is recommended

  • MSR Construction Adhesive sskf 290ML Black (Cartridge)

     15.08

    Product description MSR Construction Adhesive sskf is a 1 component, permanently elastic, fast curing construction adhesive, with a longer open time, based on Silyl Modified Polymer (SMP). It has been specially developed for bonding and sealing applications in the yacht- and boat building industry. MSR Construction Adhesive sskf has been tested and certified according to the ‘International Maritime Organisation Fire Test Procedures for Surface Flammability’, resolution A.653(16) and has been approved for use om wall, ceiling and floor applications. Application Bondings and sealings in nautical applications where adhesion and defomability have to comply to extreme requirements. Bonding push borders. Bonding and sealing deck fittings. Bonding deck coverings. Bonding sheets. Bonding and sealing deck/hull connections. Bonding and sealing deck hatches and portholes. As bedding compound whenever a higher initial strength is required. Packaging 290 ml cartridge, 400 ml and 600 ml sausage.

  • MSR Construction Adhesive sskf 290ML Grey (Cartridge)

     15.19

    Product description MSR Construction Adhesive sskf is a 1 component, permanently elastic, fast curing construction adhesive, with a longer open time, based on Silyl Modified Polymer (SMP). It has been specially developed for bonding and sealing applications in the yacht- and boat building industry. MSR Construction Adhesive sskf has been tested and certified according to the ‘International Maritime Organisation Fire Test Procedures for Surface Flammability’, resolution A.653(16) and has been approved for use om wall, ceiling and floor applications. Application Bondings and sealings in nautical applications where adhesion and defomability have to comply to extreme requirements. Bonding push borders. Bonding and sealing deck fittings. Bonding deck coverings. Bonding sheets. Bonding and sealing deck/hull connections. Bonding and sealing deck hatches and portholes. As bedding compound whenever a higher initial strength is required. Packaging 290 ml cartridge, 400 ml and 600 ml sausage.